Contact Us

Spud Miller
Telephone: 541-990-2485

We can't always answer the phone when it rings, but we return every phone message!

For inquiries, email:
tech@fuelinjectionent.com

Shipping & mailing address:
Fuel Injection Enterprises, LLC
25333 Stokes Lane
Philomath, Oregon 97370

Online Payment:
Submit a secure credit card payment to us anytime you like right here.

All shipments:

Please include a note in your package containing the following information:

• Your name
• What you want us to do
• When you need the items back in your hands if you have a close date
• Phone numbers - day time and evening if possible
• Return shipping address
• If we are shipping to a business and not a residence, let us know! This will reduce your shipping charges
• An email address would be great!

If your job is a RUSH, please call or email in advance to ensure that we can meet your required date.

Magnetos:

If you are sending a Mallory magneto and the lower drive doesn't need any attention (the gear looks fine), there really is no need to send the whole thing - the generator (top portion) is all we need. If you would like to include the transformer, we're happy to test those with your mag. Please include the cap and rotor so these can be cleaned and inspected to insure your mag performs to its potential.

Pack your mag carefully! The best method to pack a mag: Roll it up in cardboard so that the mag is contained in a rigid "tube". Tape the tube up, stuff crumpled newspaper or bubble wrap in each end and fold the ends inward. Tape the ends up good and then pad and separate this from the transformer. Wrap the transformer in bubble wrap or a smaller box inside the main box if you can.

If you do send an entire mag, tape a few layers of cardboard over the gear end of the lower drive to keep it from poking out of the box during the trip. We're happy to test your plug wires, but unless you are wondering about their condition, there is no need to send them.

Fuel Systems:

Since most fuel system pieces are made of brass or aluminum, they dent and ding very easily! To protect your components during their journey, pack your pieces in smaller, separate boxes and put all of these boxes in a larger box. If things can move inside, they will get skinned up. Use rags, newspaper or bubble wrap to occupy any free space in the boxes so things don't move. Separate things so they don't beat on each other during the trip.

Typical items needed to flow and/or recondition your setup:

• Fuel pump
• All nozzles
• Barrel Valve
• All check valves
• Any filters used
• Pills, shims and springs you already have
• Fuel Shut-off

Remember, we are an Enderle and Hilborn dealer. If you are putting together a new setup and need a few pieces, no problem - we probably have them in stock!

We don't need your blower or blower manifold. If you ship us your stack injector, we don't need the stacks. In most cases, we don't need your nozzle lines. If you question their integrity, send them along and we can test them and fix/replace if required.

Questionnaires

In order to flow your fuel system and achieve the most accurate results possible, we'll need a bunch of information from you. Please print and fill out the appropriate questionnaire below as best you can and send it to us with your hardware.

• Naturally Aspirated
• Supercharged

Don't worry if there are items on the questionnaire that you don't know. Do the best you can and if we need to, we'll call you to discuss your setup.